New, Deqsol for wooden or composites planks


Today, SOLIDOR is launching an aluminium support system for tiled terraces, as well as an aluminium support system for wooden or composite terraces that is supported on our adjustable terrace pedestals.

Previously there was only the possibility to place wooden terraces on our adjustable terrace pedestals in combination with our CPV+ top plate, where a bar supports the wooden or composite planks. But SOLIDOR wanted to think more widely and designed an aluminium bar. The idea behind this was to avoid the rotting of underlying beams and extend the life of your terrace. The Deqsol was marketed for this purpose. This aluminium system has a thickness of 30 mm and a length of 2.3 metres.

Additional benefits associated with this product:

  • Rot-proof
  • No deformation of the aluminium system possible
  • Extra stability
  • The placement uses the C-Clip and C2-Clip top plates, which results in time gain because it is not necessary to screw into the aluminium beam
  • Power cables and utilities can easily be placed under the terrace
  • Additional air circulation between wooden or composite terraces by means of joints and accessories
  • This system has three grooves that serve to secure the clips using self-tapping screws
Deq juist

This aluminium support system can be placed on our top plates C2-Clip (= Premium range) or C-Clip (= Comfort range), just like the Structusol system. Associated specific accessories linked to this product:

FC - Frontale connector

FC - Frontal connector:

This accessory enables you to connect one aluminium bar to the other. This accessory is then used as a connecting piece between the two bars.
LC - Laterale connector

LC - Lateral connector:

This connector is attached to the end of the Deqsol system and serves for the open joint between the wall and the terrace, but can also be used to combine a Deqsol aluminium bar laterally with another aluminium bar, so that they can be combined perpendicularly over the full length.

LC - Laterale connector Inox L

LC - Lateral connector Inox L:

This system is for mounting the beam laterally in a different way (along the long side) with another Deqsol aluminium bar. This accessory contains four holes in which four screws are attached, to secure the beams.


This calculator estimates the amount of adjustable pedestals and accessories you need for your project

Solidor AppSolidor App